|These modules are supplied with screw terminal connectors and two potentiometers (for gain and offset adjustment, each with an adjustment range between 3 and 10%, depending on the module). The modules are precision calibrated in the factory.|
Size: 55 x 60 x 23 mm (2.17 x 2.36 x 0.91 inches)
All connections have filters/overvoltage arresters (to 4 kV) for very hostile industrial environments. Most of the transducers are available in two versions: with a specific, fixed, customer-specific range (provides a low-cost solution for large volumes) or a programmable range (for smaller numbers of pieces and/or for optimization of stock-keeping/logistic/flexibility).
- Built-in DC-DC converter for galvanic isolation of the 24 V supply.
- Built-in adjustable limiting switch for monitoring and control, contains a relay switcher (finger connectors on the side of the module), potentiometer adjusts the switching treshold. A detailed data sheet is available.
- Very narrow enclosure (not available for all types): 55 x 60 x 12 mm (2.17 x 2.36 x 0.47 inches).
Printed Circuit Board/Euro-Card Modules (E4K1, EMUX1)
|These modules have pins (0.7 x 0.7 mm (0.028 inches), drill diameter 1.0 mm (0.039 inches) min.) for soldering the module horizontally or vertically onto the circuit board. Two external potentiometers are required (1 kOhm each as standard, SCM/FVM: 10 kOhm) for gain and offset adjustment. Most modules are available in two versions: fixed or programmable range.|
Size: 55 x 32 x 15 mm (2.17 x 1.26 x 0.59 inches)
All connectors have filters and are immune to voltage spikes up to 1 kV (IEC 801-5).
- Euro-card for four modules (E4K1)
- Euro-card with 6-channel multiplexer for one module (EMUX1)
Modules for DIN-Heads (Type B)
|These transducers have screw terminal connectors and two built-in potentiometers (for gain and offset adjustment, adjustment range typ. 5%), only fixed range. These modules are precision calibrated in the factory. All connections have filters/overvoltage arresters (to 4 kV) for very hostile industrial environments.|
Diameter: 44 mm (1.73 inches); max. height: 26 mm (1.02 inches)
Printed Circuit Board Modules
|These modules have soldering pins, two built-in potentiometers (for gain and offset adjustment, adjustment range typ. 5%), they are only available with fixed range and are precision calibrated in the factory.|
Size: 20 x 30 x 15 mm (0.79 x 1.18 x 0.59 inches) or 30 x 30 x 15 mm (1.18 x 1.18 x 0.59 inches)